Inclui:
Universal SIZE XXL Adjustable Protection Cover BLACK Dusty Motors
Como escolher o tamanho certo da Protecção Universal Ajustável Dusty Motors:
Verifique o chassis do seu modelo onde pode colar a fita de velcro.
Para obter o melhor resultado, o velcro deve ser aplicado dos lados verticais do chassis.
O velcro colado deve cobrir todo o comprimento do chassi, da torre de amortecedores dianteira à traseira, isto é, a cobertura deve cobrir toda a lateral do chassis.
Meça o comprimento de um lado do chassis.
De acordo com os resultados de uma medição, escolha um dos SEIS tamanhos de capas de protecção universais na seguinte tabela:
Tamanho | Comprimento da Capa | Comprimento Lateral Chassis* |
S | 21 cm / 8.3 inches | 20-22 cm / 7.9-8.7 inches |
S+ | 24 cm / 9.5 inches | 23-25 cm / 9.1-9.9 inches |
M | 27 cm / 10.6 inches | 26-28 cm / 10.2-11.0 inches |
M+ | 30 cm / 11.8 inches | 29-31 cm / 11.4-12.2 inches |
L | 33 cm / 13 inches | 32-34 cm / 12.6-13.4 inches |
XL | 36 cm / 14.2 inches | 35-37 cm / 13.8-14.6 inches |
XXL | 39 cm / 15.4 inches | 38-40 cm / 15-15.7 inches |
XXXL | 42 cm / 16.5 inches | 41-43 cm / 16.1-16.9 inches |
*Valores aproximados |
Características:
Seis (6) tamanhos diferentes;
Compatível com modelos de escala 1/16 a 1/8;
Adesivo original VELCRO® incluído;
Pode ser compatível com outros modelos dos acima referenciados
Protege o interior do seu Traxxas de poeiras, pó, pedras, gravilhas;
Evita danos por detritos;
Aumenta durabilidade do carro;
Troca fácil de baterias com os fechos em ZIP
Dicas importantes:
Antes de aplicar o adesivo VELCRO® ao chassis, corte a fita com o comprimento e largura necessários.
Por exemplo, para colocar a fita VELCRO® numa Nerf Bar antiga de uma Slash 4X4, a fita deve ser cortada em ambas as direções: comprimento e largura.
Certifique-se de que a superfície do chassis está extremamente seca e limpa antes de aplicar a fita VELCRO®.
Mergulhe um guardanapo em álcool (70º ou 96º) e limpe a superfície do chassi.
Deixe a fita adesiva VELCRO® aderir ao chassis durante 24 horas antes de usar a cobertura.
Utilização em Tempo Muito Quente:
Sugerimos deixar a proteção Dusty Motors aberta, de forma a promover o fluxo de ar e ajudar a manter a eletrónica ventilada.
Mesmo andando com a proteção aberta, esta vai proteger o carro da maior parte da poeira e detritos.
Quando pretender dar a velocidade máxima e andar à velocidade da Luz :), seja prudente e não deixe aquecer muito a eletrónica.
Faça algumas pausas para o motor arrefecer!
Retire a proteção e deixe arrefecer!
Utilização com Neve e Gelo:
Não traga o seu carro para casa sem remover a neve e gelo da proteção Dusty Motors.
Caso contrário, a neve vai derreter e água pode penetrar na eletrónica do seu modelo.
Não conduza debaixo de água. É um carro, não um submarino! 😀
A proteção foi feita para carros.
Apesar das capas serem excelentes, não são totalmente impermeáveis.
Não podem ser respiráveis e 100% impermeáveis ao mesmo tempo.
Os salpicos de água não são problema para as Dusty Motors por isso não se preocupe se a proteção ficar um pouco húmida!
Lembre-se de cuidar da sua capa Dusty Motors.
Lave-o à mão com água morna e limpa e seque à temperatura ambiente.
NÃO secar com um secador ou máquina de secar!.
Se você gosta das protecções Dusty Motors, recomende-a a seus amigos.
Gatilhe em conjunto e encomende em conjunto com os seus amigos.
Vai poupar nos portes de envio!
Informação adicional da marca:
This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting batteries and turning a model on/off without removing a shroud. While taking a break between the running stints the shroud can be unzipped to allow ESC and motor to cool quicker. Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool.
Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.
Features:
- Shroud comes with a zipper
- Genuine adhesive Hook & Loop Fastener® tape included
- Shock absorber cover included
- Hand made with a very strict quality inspection
- Easy installation
- MADE IN EUROPE
Fitting Help
- Before applying Hook & Loop Fastener® to the chassis, cut the tape to the necessary length and width. For example, to place Hook & Loop Fastener® tape on an old Slash 4×4 nerf bars, you must cut it in both directions: length and width.
- Make sure that the surface of the chassis is extremely dry and clean before applying the Hook & Loop Fastener® tape. Dip a napkin in pure alcohol and clean the surface of the chassis. (Use vodka if you like, but for best results, do not drink the vodka during the process).
- Let the Hook & Loop Fastener® tape adhere to the chassis for 24 hours before you use the shroud.
- If it’s hot outside, leave the Dusty Motors’ shroud unzipped to promote airflow and help keep the electronics cool. Even when bashing with a unzipped shroud, it will still keep out most of the dust and debris.
- When it’s hot outside – or if you have a car gearing set up that’s capable of reaching the speed of light – be smart when you bash. Don’t let the temperature of the electronics get too hot. Take breaks between rides. Unzip the shroud and let the model cool to a normal temperature.
- When bashing in winter, don’t bring your model into a warm room without removing ice and snow from the shroud. Otherwise, the snow will melt and water may penetrate the shroud and get into your model electronics.
- Do not drive under water. It is a CAR, not a submarine, and the Dusty Motors shroud is only made for cars. Our shrouds are good, but they can’t be breathable and 100 percent waterproof at the same time. Physics just doesn’t work that way. The splashes of water are OK, so don’t be concerned if the shroud gets a bit damp.
- Remember to take care of the shroud. Wash it by hand with warm, clean water. Let it air dry, do not put it in a dryer.
- If you like the Dusty Motors shroud, recommend it to your friends. You’ll all have a great time bashing together.
- Go in together and purchase Dusty Motors shrouds with your friends. You’ll save on shipping costs.
Nota: Este artigo é contra-indicado para crianças com menos de 3 anos.
Avaliações
Ainda não existem avaliações.